3M 7672-S-8, Быстрый старт

Страница: 11 / 14

78-8126-9537-3-B 11
5.9 Apply additional wrap(s) of hi-K mastic (not folded) onto the cable insulation for 1" (25 mm) and taper the hi-
K mastic 2" (50 mm) onto the lug barrel. ( Figure 17 ) When using a tapered barrel lug, extend the hi-K mastic
onto the barrel 2" (50 mm) past the tapered part of the barrel. ( Figure 17 )
MM MM MM MM
4YPICAL,UG 4APERED,UG
(I+-ASTIC
Figure 17
5.10 Select the roll of Scotch® Silicone Rubber Tape 70 from the kit. Using moderate tension, wrap 2 half-lapped
layers of tape over the hi-K mastic, leaving approximately 0.125" (3 mm) of mastic exposed at each end.
Taper the exposed edges of the hi-K mastic onto the cable by gently pressing along the edge with your finger.
(
Figure 18 )
3COTCH¤3ILICONE2UBBER4APE
4APER%DGEOF
(I+-ASTIC 4APER%DGEOF
(I+-ASTIC
MM
MM
3TRESS#ONTROL
!SSEMBLY4UBE
#ABLE)NSULATION
Figure 18
5.11 Apply 1 tube of P/55R Red Compound (non-silicone grease) 2" (50 mm) over the lug seal area and onto the
cable insulation for approximately 4 inches (100 mm). (
Figure 19
)
#OATWITH
022ED#OMPOUND
MM
MM
3TRESS#ONTROL
!SSEMBLY4UBE
Figure 19