manualshive.com logo in svg
background image

APPLICATIONS 

USE: The SafeClaw anchorage connector is designed for fall protection, life line systems, restraint, work 
positioning, tie back anchors, and rescue. 

REQUIREMENTS 



Follow all manufacturer’s instructions with this device. Only trained personnel should install, 
maintain, inspect and use this product and its components or other personal protective         
equipment in conjunction with this product. 



Do not use this device if its components are damaged, cracked, broken or have any deformation to 
its structure. Do not use device if it does not operate smoothly or freely. 



OSHA requires that any personal fall arrest system be removed from service if a fall has occurred. 



This product is not designed to be repaired or altered in any way. The unit must be removed from       
service. 



Use only compatible connectors with this device. Use only self-locking snap hooks or carabiners 
meeting a minimum requirement of ANSI Z359.1-99. Only use connectors that are designed for each 
application.  Ensure that all connectors are fully closed and in the locked position. Connectors 
strength must meet the 5,000 lb requirement. 



All personal fall arrest systems must meet all applicable state, federal, city, OSHA and ANSI                
requirements and any other regulating government body. It is the responsibility of the employer to    
regulate its worker and make sure all laws are being complied with concerning this device. 



This anchorage point attachment must be identified by a qualified or competent person. For fall 
arrest, the anchor point must meet the 5,000 lb requirement per single user. It is the responsibility of 
the user and employer that the concrete can meet the anchor requirements and the proper 
anchoring techniques be used with this device.  



This anchor point must be used with care. Determining the proper placement of this device must 
take into consideration that in combination with a lanyard the user will not be allowed to free fall 
more than 6 feet (1.8 M). Make sure the fall path is clear of obstructions and no swing falls occur. 



The structure or substrate that this device is anchored to must meet the capabilities of withstanding 
the 5,000 lb static load capacity per person. (5,000 lbs for one person) (10,000 lbs for two person) 



Pregnant women and minors must not use this product. 



Designed safe working load is 400 LBS (181 kg). Do not exceed this weight. 

Содержание 4075








Отзывы: