3e Technologies International AirGuard 3e-525A-3, Руководство пользователя

Страница: 72 / 112

3e–525A–3 Wireless Access Point Chapter 3: Access Point Confi guration
64 29000167-001 B
To create a randomly generated bridging confi guration fi le, click
Generate . A new confi guration is created in a temporary fi le and an
Install button appears. In order to transfer this fi le, select the Generated
File radio button, check the desired recipients in the Site Map section, and
click Apply . After the fi le has been successfully transferred to the recipi-
ents (check the status fi eld in the lower section), click Install to apply the
randomly generated confi guration fi le to the AP. Once applied, the unit
will reboot and start using the new confi guration fi le.
The automatic IP address confi guration feature can be used to assign
a remote device an IP address. This feature minimizes the effort to con-
fi gure IP addresses in a wireless network. The IP addresses are assigned
on the private class A IP address range (10.0.0.0). By default, this feature
is enabled, so if you want to assign your own IP addresses you need to
disable this feature.
You have the option to confi gure the second byte of the IP address to
limit the range in which the IP addresses are distributed. For example, if
your network already uses the 10.0.0.0 network address for other devices,
you can limit the auto confi guration to an upper range of 10.128.0.0 and
the IP addresses will start from that number.