3e Technologies International AirGuard 3e-525A-3, Руководство пользователя

Страница: 36 / 112

3e–525A–3 Wireless Access Point Chapter 3: Access Point Confi guration
28 29000167-001 B
Wireless Access Point Confi guration
General
Wireless Setup al lows your computer’s PC Card to communicate with
the access point. Once you have completed wireless access point confi gu-
ration, you can complete the rest of the confi guration wirelessly unless
you will be employing the FIPS 140-2 secure mode, assuming that you
have installed and confi gured a wireless PC card on your computer. (If
you have not done so, you will have to do that to establish communica-
tions. Follow the manufacturer's instructions to set up the PC Card on
each wireless device that will be part of the WLAN.)
WARNING : If you are confi guring this 3e–525A–3 in FIPS 140-2
secure mode, your confi guration will have to be accomplished
through the LAN port due to the secure nature of the access point.
The Wireless Access Point — General screen lists the MAC Address
of the AP card. This is not the MAC Address that will be used for the BS-
SID for bridging setup, however. That is found on the Wireless Bridge
— General screen.
If you will be using an SSID for a wireless LAN, enter it here and in
the setup of each wireless client. This no men cla ture has to be set on the
access point and each wireless device in order for them to communicate.