5. Attach Top
Use access through the doors to attach
the top of the enclosure using M4 10mm
screws.
6. Attach Right Side
The right side has a front vent port for
air flow, and a rear square vent to
access the power supply and o
ff
/on
switch.
If you have a CRX, then the right side
will be exactly like the Left Side, with
the addition of an access port for the
power cable and switch. If you have a
CR-10S Pro, then the right side won’t
have a door.
The right side is tricky to attach because of the large size of the enclosure. Although
attaching it consists of simply screwing it to existing connectors, unless you have
exceedingly long arms you will need a buddy to help hold the nuts in place. Customers
have done everything from having a child climb into the enclosure to placing the entire
enclosure on the side of a table to access the nuts.
Note that the vents slide in from the outside.
Copyright 2020 3DUpfitters
13
