2
GETTING STARTED
Figure 2.45: The Repetier-Host interface with loaded G-code
5. Click the “Run Job” button on the top menu bar (Figure 2.46). The printer will follow
the instructions in the G-code to initialize its position and heat up the extruder and
HBP. Once both the extruder and HBP reach their target temperature, the printer
will start the print job.
Figure 2.46: Running print job from the Repetier-Host interface
6. After the print job is done, you will get your first 3D model printed out from your
Artifex 3D model (Figure 2.47). Wait until both the extruder and HBP completely
cool down before you take off the print off the HBP.
41