3DMakerWorld Artifex 2, Руководство пользователя

Страница: 10 / 85

1 INTRODUCTION
We would also like to address our sincere thanks to our customers of the first generation
of Artifex 3D printers. All of your feedback and suggestions have made our products even
better and more capable.
Last, but certainly not the least, our gratitude to all the pioneers, makers and active
players in the reprap and other 3D printing communities for all the inspiration and support.
1.5 Overview of chapters
Chapter 2 will be focused on how to set up the software environment and the printer hardware
for printing using PLA filaments. By the end of Chapter 2, you will be able to print out
your first 3D model using a pre-generated g-code for the Artifex 2 3D printer.
Chapter 3 will discuss how to generate g-code from a 3D model of your choice, either
from your own creation or from an online 3D model repository. A few 3D modeling tools
and online 3D model repositories will be introduced. And the main content of Chapter 3
will be focused on the set-up of slicing parameters.
Chapter 4, and 5 will cover the configuration of printing parameters and printer set-up
for printing with ABS and flexible filaments, respectively. Chapter 6 will discuss how to
use your Artifex 2 Duo 3D Printer. Chapter 6 will list our support information for future
assistance.
http: // 3dmakerworld. com
10