3Dlabs Wildcat 4210, Руководство пользователя

Страница: 2 / 34

Copyright
© 2000 3Dlabs, Inc.
Notice
3Dlabs, Inc. makes no representation that the use of its products in the manner described in this publication will not
infringe on existing or future patent rights, nor do descriptions contained in this publication imply the granting of
licenses to make, use, or sell equipment or software in accordance with the description.
Trademarks
3Dlabs is a registered trademark, and Wildcat, SuperScene, and DirectBurst are trademarks of 3Dlabs, Inc. or 3Dlabs
Inc. Ltd. Pentium is a registered trademark of Intel. Athlon and 3DNow! are registered trademarks of AMD.
OpenGL
is a registered trademark of Silicon Graphics, Inc. SoftEngine is a trademark of Vibrant Graphics, Inc. AutoCAD is a
registered trademark of AutoDesk Inc. Colorific is a registered trademark of E-Color, Inc. Microsoft, Windows NT,
Windows 2000 are registered trademarks of the Microsoft Corporation. All other trademarks and registered trademarks
are the property of their respective holders.
FCC/DOC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigencies du Règlement sur le materiél brouilleur du Canada.
Warnings
Changes or modifications made to your 3Dlabs graphic accelerator card not expressly approved by 3Dlabs, Inc. void’s
the user’s warranty.
To reduce the risk of electrical shock, do not attempt to open the equipment unless instructed. Do not use a tool for
purposes other than instructed.
There are no user serviceable parts in the card. Refer all servicing of the card to qualified service personnel.
To comply with FCC Class A limits, you must use shielded cables with this device.
Specifications are subject to change without notice.
P/N DH001000