3DKreator Kreator Motion, Руководство пользователя

Страница: 4 / 23

Basic information
When printing process do not touch: the model, head of the
working table; failure to comply with this warning may cause burns
and / or deformation of the print,
After completion of the printing wait until the printer
components cool down,
When printing, do not place other objects in the area of
printer as this may damage the printer,
Use gloves and goggles when removing the model from the
platform,
Juveniles can use the printer only under adult supervision,
Additional tools should be kept away from juveniles.
The device is powered by AC 230V / 50Hz. Connect it to a power socket
with a safety pin (earth) to prevent electric shock in the event of fault.
The place of installation should meet the following conditions:
the room must be equipped with ventilation appropriate to its size,
the printer must be placed on a flat, stable surface.
Do not install the device:
outdoors,
in damp or places exposed to flooding,
in the vicinity of flammable materials and heat sources.
Before using the Kreator Motion printer, it is recommended to read the
following instructions.
4