3DKreator Kreator Motion, Руководство пользователя

Страница: 22 / 23

Additional information
Each time you print, clean the table with the remains of the filament and other dirt. It has a big impact on the proper
bonding of layers of the material in the initial stage of printing. Use spatula and dry cloth.
Filament should be stored according to manufacturers guidelines.
It must be clean and dry place. Contact with moisture and dirt may negatively affect its properties and result in pro-
blems with the device. Malfunctions caused by the use of low-quality filament are not covered by the warranty.
The success of print largely depends on its base. It is worth watching the process of applying few initial layers. If they
are fully set on the platform, we can be confident that the further printing process will be conducted properly.
Do not heat the print head when fans are off, it may cause a damage of the printer.
22