3DKreator Kreator Motion, Руководство пользователя

Страница: 19 / 23

Installation / Change of filament
3.
4.
5.
Open the side door of the fila-
ment compartment. If you load the material for the first time, skip
this step. If you change the filament, remove
the old material from the tube through the
filament sensor inside the chamber and re-
move the spool from the roller. Prepare the new filament spool–unravel
about 40
cm of material and make sure that the material is
clean. Then straighten around 5 cm of the filament
that you want to load to allow its smooth insertion
into the head. Uneven ends must be cut using a pair
of pliers, which you can find in the toolbox.
19
3. 4. 5.