3DKreator Kreator Motion, Руководство пользователя

Страница: 21 / 23

Printing
Perform calibration of the platform with a procedure which can be found in this manual (page 16)
Instal material in your printer (page 18)
Insert the SD card into the reader located at the lower right corner of the device.
From the main menu select
Print
.
From the menu, choose the type of material used, followed by the file that you want to print.
The printer will warm the head and print platform to the setpoint temperatures, after which it will begin to print.
1.
2.
3.
4.
5.
6.
Printing with 3DKreator is easy.
Follow these guidelines to create three-dimensional models:
21
20