3DKreator Kreator Motion, Руководство пользователя

Страница: 11 / 23

First run
7.
Remove the box located
under the table - you might
need to use a bit of force
because of the close place-
ment of the boxes.
8.
Plug the power cord into the
socket at the rear of the prin-
ter and plug into an electrical
outlet.
9.
Turn on the printer using the
button located above the po-
wer socket.
10.
The print chamber should
light up blue, which means
that it is in standby mode.
11
7. 8. 9. 10.