3DHISTECH Ltd. Pannoramic SCAN II 2.0 Скачать руководство пользователя страница 34

Страница: 34 / 142

Pannoramic SCAN II 2.0 User’s Guide

4 Software Description

Upon clicking the slide icon or entering slide position number at the right side, the slide can
be loaded.

Unload the slide by clicking

Unload

next to slide image, and unload the magazine by clicking

Unload

next to the rack image.

If there is a lens marking at the bottom of the position preview in the magazine image, the

preview image of that slide has already been created, and if a question mark is displayed the
slide was not yet loaded. A hatch and lens marking represent a slide that is loaded at the

moment.

Emergency Position

: If a slide has been jammed in, the unloading position where the

magazine should be moved can be defined.

Slide removed:

Click this button to inform the control software that the slide has been

removed manually.

– Objective changer

– Live view is on

– Live view is on with the shutter closed

–

Toolbar for live images

•

The toolbar is only available for the displayed live image, but not available for camera images
during digitization.

•

One pixel on the monitor corresponds to one pixel on the camera

•

The live image completely fills the display area

•

Displays or hides the vertical and horizontal scale bars

•

Displays the magnifier window

•

Activates red marking on overexposed pixels

•

Saves the current image as BMP or JPEG file

Fast live mode –

live images are displayed with a frequency of at least 10 images per second. If an

exposure time is set to more than 100 ms, the pixel values are multiplied accordingly (for example, if

June 4, 2018 - Rev. 2

3DHISTECH Ltd.

34(142)

For research and education uses only, not for use in diagnostic procedures.

Содержание Pannoramic SCAN II 2.0















































































































































Результаты поиска

Содержание Pannoramic SCAN II 2.0

Отзывы:

Бренды по названию

Популярные бренды

3DHISTECH Ltd. Pannoramic SCAN II 2.0, Руководство пользователя

Результаты поиска

Содержание Pannoramic SCAN II 2.0

Отзывы:

Бренды по названию

Популярные бренды