ProJet
®
860
Pro
User Guide
Additional Operations
3dscentral.3dsystems.com
43
All Rights Reserved
5/12/13
5.3 Add Binder
If there is not enough binder in one or more of the cartridges, 3DPrint displays
BINDER LOW
in the
Printer
Status
dialog.
Important:
Do not add binder unless you are prompted to in the 3DPrint
Printer Status
dialog.
To add binder, follow the steps below.
1.
Pull the empty binder cartridge out of its housing on the printer.
2.
Get a new binder cartridge. Check the expiration date, and check the cartridge label for the correct
color and orientation. Match the cartridge color to the color label on the printer.
3.
Insert the cartridge into its housing with the color marking on top. Ensure the cartridge is pushed all the
way in. You should feel it gently snap into place.
Important:
If a cartridge does not snap into place,
do not force it
. Check the orientation and that it is
the correct color and try again.
5.4 Adding Core to the Feeder
3DPrint evaluates the geometry of the part to determine if there is enough Core material in the Feeder to
complete the build. If there is not enough, 3DPrint displays
ADD CORE
in the
Printer Status
dialog.
Important:
Do not add Core to the Feeder unless you are prompted to in the 3DPrint
Printer Status
dialog.
To add Core, follow the steps below.
1.
Before
adding any Core, be sure you have
•
Vacuumed all Core out of the Build Bed, and from the Deck, Fast Axis, etc.
•
Finished cleaning any parts in the Post Processing Unit.
•
Vacuumed up any other Core needing cleanup.
2.
Check the expiration date on the container.
3.
Open the printer top cover and place the container inside.
