3D Systems ProJet 660Pro Скачать руководство пользователя страница 26

Страница: 26 / 88

ProJet

x60

Pro

Series User Guide

Setup And Print The Build

3dscentral.3dsystems.com

5/12/13

2.3 Check The Default Settings

Before you start your build, check the settings for the printer.

2.3.1 Printer Settings

Select

Settings

Printer Settings

to display the

Printer Settings

dialog.

In the

Printer Settings

dialog, check that the default printer is the printer that is connected to your

computer.

If you need to make a change, click on

Select Printer

In the

Select 3D Printer

dialog, choose

Network

as the

Port Type

. Click the

Find

button to locate the

printer on the network. If the printer is connected to the network, it will appear on the list. Select the
printer and click

The

Default Printer Settings

dialog reopens showing your new default settings. To save your set-

tings, click the

Save As Default

button. You can change these settings at any time by repeating Steps

1 - 4.

2.4 Check The Build Settings

Before

printing,

always

check your build settings.

Select

Settings >

Materials

Check that the printer listed in the

Select Printer

field is the printer connected with the computer run-

ning 3D Print, and that the printer is Online.

Print in Monochrome

instructs the printer to ignore any color information contained in your 3D model

and print a completely white, monochrome part.

(ProJet 260C and 460Plus only)

Click

2.5 Prepare the Build Area

Go to your printer and check each item listed below to ensure the printer is ready to print. It is important to
check each of these items before every build.

•

Check that the Deck, Fast Axis, and Build Bed are clean of any loose Core material. See

Section

3.1, ’Vacuum Excess Core Material’

for instructions on how to vacuum up excess Core from

these areas.

•

Check that the Debris separator is empty. See

Section 3.2, ’Empty The Debris Separator’

for

instructions on how to empty the Debris separator.

•

Check that Carriage and Rails are clean. See

Section 3.3, ’Clean The Fast Axis Rails and Car-

riage’

for instructions on how to clean the Carriage and Rails.

•

Check that Service Station is clean. See

Section 3.4, ’Clean The Service Station’

for instructions

on how to clean the Service Station.

•

Check that the platform is raised to the top of the Build Bed. Select

PREP BUILD CHAMBER

CONTINUE

on the LCD menu to raise the platform to its proper position.

Содержание ProJet 660Pro




















































































Результаты поиска

Содержание ProJet 660Pro

Отзывы:

Похожие инструкции для ProJet 660Pro

Бренды по названию

Популярные бренды

3D Systems ProJet 660Pro, Руководство пользователя

Результаты поиска

Содержание ProJet 660Pro

Отзывы:

Похожие инструкции для ProJet 660Pro

Бренды по названию

Популярные бренды