manualshive.com logo in svg

3D Systems ProJet 1200, Руководство пользователя

Поделиться
Скачать
3D Systems ProJet 1200 Скачать руководство пользователя страница 37

32

3D Systems, Inc.

REMOVE THE PART FROM THE PRINTER

After the part has been printed, it must be processed . Refer to the following steps to complete post processing of the part . You will need 

a towel to catch resin that may drip from the part as well as two containers of 70% alcohol large enough to completely submerge the 

part. It is important to limit the exposure of the material cartridge to light. 

Always wear protective gloves during post process . 

CAUTION:  Always follow the precautions noted on the MSDS sheets for any chemical being used .

1 .  Place a towel under the part . Rotate the print platform clamp lever up enough 

to unlock the print platform .

NOTE: Resin may drip from the part . The towel is used to collect 

dripping resin so that printer parts are not exposed to resin .

2 .  Pull the print platform handle (A) out from under the clamp .

NOTE: The part will hang down under the print platform .

A

Содержание ProJet 1200















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды