3D Systems, Inc.
13
10. In the Device Registration, change the method to the desired method. If you select the
Best Fit
method, for example, the Best Fit
alignment will be used to align for the next scans. For more information, see
.
11. Go back to the Scan menu by clicking
Back
.
12. Reposition the part and click
Scan
to take another scan.
Note: If a scan was made using the Best Fit alignment method, make sure at least 30% of the original scan area is in the
next scan. If the Target alignment method was used, make sure that at least three targets from the first scan area are
visible in the next scan.
13. Continue scanning until the project is completed and click
Accept
(or
OK
) in your application.
