3D Systems Geomagic Capture Series Скачать руководство пользователя страница 19

Страница: 19 / 25

3D Systems, Inc.

MENU OVERVIEW

SCAN

Live View

Displays current camera view. This view can be changed by Scanner Tabs or Camera View Switch.

Scanner Tab

Allows users to switch each scanner’s camera view. If multiple scanners are connected to the Geomagic Capture, those tabs

will be displayed at the bottom of the Live View.

Camera View Switch

Allows users to switch between the side of camera view. It is useful when users check the right side or the left side of cameras

in each connected scanner before scanning the part.

Starting Position of Rotational Scanning

Indicates the starting point of rotational scanning (from 0 to 360 rotational degrees).

Scanning Button

Starts the scanning. This button is available after the Geomagic Capture Series 3D scanner is connected to the application.
When a turntable is connected and while the number of scans are being adjusted in the Turntable option, the small triangles

will be displayed around the Scan button according to the specified number of divisions. When the scanning is started, a red (or

blue) rounded line will be dynamically displayed around the Scan button, and indicates that where on a part a scanner is facing

in 360 rotational degrees as well as how many times a scan was performed.

Содержание Geomagic Capture Series

























Результаты поиска

Содержание Geomagic Capture Series

Отзывы:

3D Systems Geomagic Capture Series, Руководство пользователя, Страница: 19 / 25

Результаты поиска

Содержание Geomagic Capture Series

Отзывы: