Manual_DTC133UHL_EN
Rev. 1.0 / 17.11.2022
13 / 18
3.6 General safety instructions
•
Do not expose the device to rain or moisture, otherwise short circuits or electric
shocks may occur.
•
Lay connecting cables in such a way that they do not pose a danger
•
Disconnect the device completely from the mains if it is not to be used for a longer
period of time. We recommend unplugging the mains cable to completely disconnect
the device from the mains.
•
The system must be immediately disconnected from the mains and must not be used
again, and qualified electrical personnel must be contacted and informed if:
o
The mains cable, devices or assemblies of the system, the housing or parts
thereof are damaged
o
Liquid or objects get into the device
•
Ensure that all cable connections on the device are freely accessible.
•
The ventilation openings of the device must not be covered, as this can lead to a
build-up of heat inside the device. The device must not be operated directly next to
heat sources. Ensure adequate ventilation.
•
There must be at least 15 cm clearance on all sides of each device from walls,
ceilings, shelves, etc. to ensure a sufficient circulation of air.
•
Do not open the housing, as there may be components inside that are possibly under
high voltage. There are no components inside the device that can be serviced or
replaced by the user.
•
Opening the housing, repairs, modifications or conversions to the device or attempts
to do so will result in the immediate voiding of any warranty/liability claims against 3D
Global Solutions unless these have been expressly approved in writing by 3D Global
Solutions.
