Manual_DTC133UHL_EN
Rev. 1.0 / 17.11.2022
16 / 18
•
Connect a suitable ext. power supply to the designated interface of the device.
•
Start your system.
•
If necessary, switch on the display with the "Power button" on the back.
5 Operation
•
The device switches on automatically as soon as an image signal is present.
Rear LED lights up green
•
The device switches off automatically (StdBy) as soon as no image signal is present.
Rear LED lights up red
•
The device can be switched off or on with the "power button" on the rear side.
rear LED off (resp. red or green)
Beyond that, the device does not offer any independent operating options. All content and
functions (e.g. head tracking behavior) are controlled via the corresponding external
devices.
6 Maintenance
6.1 Cleaning
•
Before cleaning the device, all connection cables must be disconnected. Observe
also the instructions in paragraph 4.3 on page 15.
•
Clean the screen surface and the housing only with dry or slightly damp, soft and lint-
free cloths.
•
Use only a soft and lint-free cloth moistened with 70% isopropanol to disinfect the
surfaces.
•
Do not use unsuitable cleaning agents, chemicals and/or unsuitable cleaning
techniques to clean the device.
