Manual_DTC133UHL_EN
Rev. 1.0 / 17.11.2022
5 / 18
1 General
1.1 Introduction
Thank you for purchasing this device.
Please read this instruction completely and carefully before initial unpacking and
commissioning, because it contains, among other things, important information for
unpacking, commissioning and using the device.
3D Global Solutions GmbH reserves the right to make changes to its products, their
documentation or specifications without prior notice. All information and functions described
in this document refer to the device status (hardware & software) at the time of delivery ex-
factory. Functions or behavior of any updates carried out subsequently are not described in
this operation instruction.
All information given here has been carefully checked, but no guarantee can be given for its
correctness and/or completeness.
1.2 Purpose of this document
The purpose of this user manual is to assist you in commissioning and operating the device.
In addition, this document is intended to draw your attention to possible risks during
unpacking, commissioning and use of the device, and to highlight measures for avoiding
risks.
If you do not fully understand any points in the operation instruction or if you have any
questions, please contact the Support department at 3D Global Solutions GmbH.
A lack of or insufficient knowledge of this user manual will result in the loss of any liability
claims against the manufacturer.
1.3 Related documents
The datasheet belonging to and supplied with this product is an integral part of this operating
instruction. Both documents are part of the device and must therefore always be kept within
easy reach near the device.
The latest documents are available for download at
Please check this
page from time to time for information on the latest changes.
