3Com VCX V7111 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 58

3Com VCX V7111 Скачать руководство пользователя страница 7

3Com VCX V7111 Fast Track Installation Guide

7

SELV

— Safety extra low voltage circuit.

TNV-3

— Circuit whose normal operating voltages exceeds the limits for an SELV circuit

under normal operating conditions and on which over voltages from Telecommunication
Networks are possible

TNV-2

— Circuit whose normal operating voltages exceeds the limits for an SELV circuit

under normal operating conditions and is not subjected to over voltages from
Telecommunication Networks

FCC Notice to Users

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 68 of the FCC rules and the requirements adopted by
ACTA. On the bottom of this equipment is a label containing a product identifier in the format
US:3CMIS02BMP10XFXO

. If requested, this number must be provided to the telephone

company.

The telephone company may make changes in the facilities, equipment, operations, or
procedures that could affect the operation of the equipment. If this happens, the telephone
company will provide advance notice for you to make necessary modifications to maintain
uninterrupted service.

«
...
5
6
7
8
9
...
»

Содержание VCX V7111



























































Отзывы:

Нет отзывов