![background image](http://html1.mh-extra.com/html/3com/v6100/v6100_installation-manual_440849015.webp)
C
HAPTER
3:
C
ONFIGURING THE
V6100
The V6100 is supplied with application software already resident in its flash memory (with
factory default parameters).
Assigning the V6100 IP Address
describes how to assign IP address to the V6100. See
Configuring the V6100 Basic Control Protocol Parameters
describes how to set up the
V6100
with basic parameters using a standard Web browser (such as Microsoft
TM
Internet
Explorer).
Assigning the V6100 IP Address
applies equally to MGCP, MEGACO, H.323 and
SIP.
Assigning the V6100 IP Address
To assign an IP address to the V6100 use one of the following methods:
HTTP using a Web browser (see
Assigning an IP Address Using HTTP
).
BootP
Assigning an IP Address Using BootP
The embedded Command Line Interface (CLI) accessed via Telnet (see
Assigning an IP Address Using the CLI
).
DHCP (refer to the
V6100 Digital Gateway User
Guide).
Use the ‘Reset’ button at any time to restore the V6100 networking parameters to their
factory default values (see
Restoring Networking Parameters to their Initial State
Table 2
V6100 Default Networking Parameters
Parameter Default
Value
IP Address
10.1.10.10
Subnet Mask
255.255.0.0
Default Gateway IP Address
0.0.0.0
V6100 Digital Gateway Installation Guide
15
Содержание V6100
Страница 8: ...8 V6100 Digital Gateway Installation Guide ...
Страница 10: ...10 V6100 Digital Gateway Installation Guide ...
Страница 38: ...38 V6100 Digital Gateway Installation Guide ...
Страница 46: ...46 V6100 Digital Gateway Installation Guide ...