3Com V6100, Руководство по установке

Страница: 18 / 47

Figure 4 Client Configuration Screen with Blank Parameters
Assigning an IP Address Using the CLI
To assign an IP address using the CLI, follow these 7 steps:
1 Enable the Embedded Telnet Server:
ƒ
Access the V6100 Embedded Web Server (see Accessing the Embedded Web
Server ).
ƒ
Set the parameter ‘Embedded Telnet Server’ (under Advanced Configuration >
Network Settings > Application Settings ) to ‘Enable (Unsecured)’.
ƒ
Click the Reset Device button on the main menu bar; the Reset screen is displayed.
ƒ
Click the Reset button in the middle of the Reset screen with the Burn option
selected; the V6100 is shut down and re-activated. A message about the waiting
period is displayed. The screen is refreshed.
2 Use a standard Telnet application to connect to the V6100 Embedded Telnet Server.
3 Login using the username (‘Admin’) and password (‘Admin’).
4 At the prompt type ‘conf’ and press enter; the configuration folder is accessed.
5 To check the current network parameters, at the prompt, type ‘GCP IP’ and press enter;
the current network settings are displayed.
18
V6100 Digital Gateway Installation Guide