manualshive.com logo in svg

3Com SuperStack 3 NBX, Руководство администратора

3Com SuperStack 3 NBX - это мощная телефонная система для бизнеса с удобным администраторским руководством. Скачайте бесплатно Administrator's Manual с manualshive.com для легкой установки и настройки. Получите доступ к подробной информации для оптимальной работы вашей системы.

Поделиться
Скачать
background image

6

Exclusive Remedies and Limitations of Liability. THE ENTIRE LIABILITY OF 3Com AND ITS AFFILIATES, 
DISTRIBUTORS, DEALERS AND SUPPLIERS (AND THE DIRECTORS, OFFICERS, EMPLOYEES, AGENTS AND 
AFFILIATES OF ALL OF THEM) AND YOUR EXCLUSIVE REMEDIES FOR ANY DAMAGES SHALL BE (1) FOR 
FAILURE OF PRODUCTS DURING THE WARRANTY PERIOD, THE REMEDIES STATED IN SECTION 2 HEREOF; 
(2) FOR INFRINGEMENT, THE REMEDIES STATED IN SECTION 5 HEREOF; AND (3) FOR CLAIMS OTHER 
THAN SET FORTH ABOVE, 

3Com

 LIABILITY SHALL BE LIMITED TO PROVEN DIRECT DAMAGES IN AN 

AMOUNT NOT TO EXCEED THE ORIGINAL DISCOUNTED PURCHASE PRICE OF THE PRODUCT.

3Com SHALL IN NO EVENT BE LIABLE FOR THE FOLLOWING TYPES OF DAMAGES: (1) INCIDENTAL 
DAMAGES; (2) SPECIAL OR CONSEQUENTIAL DAMAGES; (3) LOST PROFITS, SAVINGS OR REVENUES OF 
ANY KIND, INCLUDING WITHOUT LIMITATION LOSS OF DATA, MESSAGES, OR TELEPHONE CALLS; AND 
(4) CHARGES FOR COMMON CARRIER TELECOMMUNICATIONS SERVICES OR FACILITIES ACCESSED 
THROUGH OR CONNECTED TO PRODUCTS. TO THE EXTENT PERMITTED BY LAW, SUCH DAMAGES ARE 
HEREBY EXCLUDED BOTH FOR PROPERTY DAMAGE, AND TO THE EXTENT NOT UNCONSCIONABLE, FOR 
PERSONAL INJURY DAMAGE.

THE FOREGOING LIMITATIONS OF LIABILITY SHALL APPLY REGARDLESS OF THE CAUSE OF ACTION 
UNDER WHICH SUCH DAMAGES ARE SOUGHT.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

7

Third-Party Products. The decision to acquire hardware, software (in any form), supplies or service (other 
than the Product accompanying this Agreement) from parties other than 3Com (“third-party Products”) is 
yours, even if 3Com helps you identify, evaluate or select them. EXCEPT AS SPECIFICALLY AGREED TO IN 
WRITING, 3Com IS NOT RESPONSIBLE FOR, AND EXPRESSLY DISCLAIMS LIABILITY FOR, PERFORMANCE 
OR QUALITY OF THIRD-PARTY PRODUCTS OR THEIR SUPPLIERS; any claim that you have in connection 
with the third-party Products and any remedies for such claim will be against the supplier of such 
third-party Products.

8

Assignment. You may not assign this Agreement (including the licenses granted hereby), either in whole 
or in part, whether by operation of law or otherwise, without the prior written consent of 3Com. Any 
attempt to assign your rights, duties or obligations under this Agreement without such consent shall be 
null and void. Subject to the foregoing, the rights and liabilities of the parties under this Agreement will 
bind and inure to the benefit of the parties’ respective successors and permitted assigns.

9

General. You acknowledge that you have read this Agreement, understand it, and that by using the 
Product you agree to be bound by the terms and conditions of this Agreement. You assume full 
responsibility for the use of the Software and agree to use the Software legally and responsibly. This 
Agreement shall be governed by the substantive laws of the State of California, without regard to conflicts 
of law principles, except as to copyright matters, which are governed, by federal law. This Agreement is 
deemed entered into, by both parties, in Santa Clara, California. In the event that any provision of this 
Agreement shall be held by a court or other tribunal of competent jurisdiction to be unenforceable, such 
provision shall be enforced to the maximum extent permissible and the remaining provisions of this 
Agreement shall remain in full force and effect. All rights in the Software not specifically granted in this 
Agreement are reserved by 3Com, and, except for the express licenses granted herein, no other licenses 
are granted by 3Com by implication, estoppel or otherwise. You agree not to export the Product, without 
the express written consent of 3Com.

Should you have any questions concerning this Agreement, you may contact 3Com at the address set 
forth below.

3Com Corporation

5400 Bayfront Plaza
P.O. Box 58145
Santa Clara, California, USA
95052-8145

North America:

Tel: 800-NET-3Com 

Outside North America:

www.3com.com

Содержание SuperStack 3 NBX

















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SuperStack 3 NBX

NEC SL1100 Quick Reference Sheet preview
SL1100
Бренд: NEC Страницы: 6
NEC Univerge SV9100 Quick Reference preview
Univerge SV9100
Бренд: NEC Страницы: 8
NEC Univerge SV9100 Quick User Manual preview
Univerge SV9100
Бренд: NEC Страницы: 4
NEC Univerge SV9100 User'S Information Manual preview
Univerge SV9100
Бренд: NEC Страницы: 9
NEC Univerge SV9100 Setup Manual preview
Univerge SV9100
Бренд: NEC Страницы: 36
NEC UNIVERGE SL2100 Quick Manual preview
UNIVERGE SL2100
Бренд: NEC Страницы: 4
NEC Univerge SV9100 Reference Manual preview
Univerge SV9100
Бренд: NEC Страницы: 5
NEC UNIVERGE SL2100 Training Manual preview
UNIVERGE SL2100
Бренд: NEC Страницы: 11
NEC SL1100 Pc Programming Manual preview
SL1100
Бренд: NEC Страницы: 256
NEC SL1100 Installation Instructions Manual preview
SL1100
Бренд: NEC Страницы: 30
NEC SL1100 Quick Start Manual preview
SL1100
Бренд: NEC Страницы: 5
NEC Univerge SV9100 Administration Manual preview
Univerge SV9100
Бренд: NEC Страницы: 3
NEC Univerge SV9100 Quick Reference Manual preview
Univerge SV9100
Бренд: NEC Страницы: 4
NEC UNIVERGE UM8700 Quick Reference Card preview
UNIVERGE UM8700
Бренд: NEC Страницы: 2
Samsung MX-F870 Service Manual preview
MX-F870
Бренд: Samsung Страницы: 70
Samsung MM-L7 Manual Del Usuario preview
MM-L7
Бренд: Samsung Страницы: 21
Samsung MM-ZB9 Service Manual preview
MM-ZB9
Бренд: Samsung Страницы: 28
2N Netstar Installation And User Manual preview
Netstar
Бренд: 2N Страницы: 21

Бренды по названию

Популярные бренды

Загрузить еще бренды