13
Fitting Another Unit
To fit another unit:
1
Rest the second unit on top of the clip and align it with the front
of the unit below.
2
Press down gently on the unit to secure it onto the clip, ensuring
the fastening pieces fit into the slots on the unit below, as
shown in
Figure 2
(picture 2).
Figure 2
Stacking Units Together
Removing The Stacking Clip
To remove the Stacking Clip:
1
Remove the top unit together with the clip. If you hook a finger
around one of the fastening pieces and then pull it gently out of
the slot, the clip should come away with the upper unit attached
to it.
2
Push the clip in the center, so it bends towards the base of the
unit, and then separate once the clip is loose.
1
Fastening
Piece
2
Fastening
Piece
