8
Summary of Features
The Network Storage Server has the following features:
■
One auto-negotiating Ethernet or Fast Ethernet port so you
can install the Network Storage Server in an Ethernet
(10 Mbps) network, a Fast Ethernet (100 Mbps) network or a
dual-speed (10 or 100 Mbps) network. This port can also
operate in full or half duplex mode.
■
20 GB or 40 GB of storage space.
■
LED status indicators on the front panel.
■
A Web-based Administration System that allows a Network
Administrator to:
■
Configure and manage the Network Storage Server.
■
Create Users, Groups and Shares and impose security
restrictions on the Network Storage Server.
■
A Web-based Failsafe Mode that allows the Network
Administrator to:
■
Upgrade its Operating System.
■
Run Hard Disk checks.
■
Reset the Unit back to its factory defaults.
■
An online help system that gives explanations and instructions
on how to configure the Network Storage Server and use the
Administration System.
■
A replaceable Hard Disk, in the unlikely event the Hard Disk
should fail.
System Requirements
To install your Network Storage Server, refer to the “Quick
Installation Guide” (DIA1950-0AAA0x) that accompanies this
product. In summary, you will need:
■
A functioning Ethernet or Fast Ethernet network.
■
One spare Ethernet or Fast Ethernet port on your Hub or
Switch for each Network Storage Server you wish to install.
■
An Operating System (Windows
®
95, Windows 98 or
Windows NT 4.0) with network support configured, running
on your workstations.
■
Microsoft Internet Explorer 4.0 (or above) or Netscape
Navigator 4.5 (or above) as your Web browser to access the
Administration System.
