14
P
OWERING
U
P
AND
P
OWERING
D
OWN
Powering Up the Network Storage Server
To power up the Network Storage Server:
1
Attach the power adapter to the power adapter socket located in
the back of the Network Storage Server.
2
Plug the other end into a power outlet.
When power is supplied, the LEDs on the front of the Network
Storage Server will flicker for approximately two minutes while it
performs a Power On Self Test (POST). The Network Storage
Server will be ready to use when the Power LED is Green; the
Disk LED has finished flickering and the Disk Space Used LEDs
have stopped moving up the LED scale.
See the Network Storage Server LED Function table on
page 11
for further LED information.
To power up the Network Storage Server into its Failsafe Mode,
see the section about the “Failsafe Mode” on
page 21
.
Powering Down the Network Storage Server
To power down the Network Storage Server, press the Shutdown
button on the front of the unit for between two and four
seconds.
The Network Storage Server will take approximately one minute
to shut down. As the Network Storage Server powers down, the
Disk Space Used LEDs will go to the maximum point on its scale
and then gradually move down the scale until full shut down.
When the Power LED appears Amber and there are no
Disk Space Used LEDs lit, the Network Storage Server has shut
down.
