3Com IntelliJack NJ200, Руководство пользователя, Страница: 41 / 58

Changing Device Configuration 37
17 Select the Advanced tab for this window:
18 You can change the Max Frame Size and Power Forward settings by selecting an
option from the drop-down list.
19 From this window, you can see another set of tabs, one for each port on the
Network Jack. Click on the port whose settings you want to change, check the
box next to the setting to be changed, and select a value from the drop-down list.
You can change the Flow Control, the AutoMDI(X) crossover capabilities, and the
Multicast Rate Limit.
20 At the bottom of this window is an option to restore some of the configuration
settings to their default values. If you check this box, the following settings will be
restored:
Global Setting Default Value
Max Frame Size 1518 or 1522 if tagged
Counter Mode Count good frames
Priority Scheduling Mode 8, 4, 2, 1 weighted
VLAN Tag for LAN Port (egress) Egress frame unmodified
VLAN Tag for LAN Port (ingress) Ingress frame unmodified
Power Forward Auto detection
SNMP “Set” Permission Not allowed