3Com IntelliJack NJ200, Руководство пользователя, Страница: 25 / 58

3
U
SING THE
L
OCAL
C
ONFIGURATION
M
ANAGER
Initializing the NJ200
Network Jack
Once you have installed the NJ200 hardware on your network and the Local
Configuration Manager software on your computer, you need to perform an
initial configuration of the Network Jack.
1 The first step is to connect your computer to the NJ200 that you are installing.
Attach an Ethernet cable from a computer running the Local Configuration
Manager software to any one of the four personal area network (PAN) ports on
the front of the NJ200.
2 Click on the desktop shortcut icon labeled NJ200 Local Config Mgr to start the
program. When it launches, you will see a window like this:
3 The MAC address and default IP address of the currently connected NJ200 will
appear in the first field. If you connect to another NJ200, you must click the Query
button to refresh the window.
If you are not connected to any Network Jack, the field will display the message
Not Connected. If the Not Connected message appears, check your connection to
the Network Jack and click the Query button.
4 Make sure the General tab is selected.
5 Enter Location Information for the particular NJ200 you are configuring. This field
can help you and other network managers identify this Network Jack in the
future. You may enter any information you like (up to 256 characters), but we
recommend that you enter a logical, easy to follow description, such as “Building
A, 3rd floor, room 315, West wall.”