3Com IntelliJack NJ200, Руководство пользователя, Страница: 36 / 58

32 C
HAPTER
4: U
SING THE
C
ENTRAL
C
ONFIGURATION
M
ANAGER
2 Select Configuration from the Devices menu or the toolbar or right click on a
device and select Configuration from the pop-up menu.
This window has six tabs across the top--General, Priority, VLAN, Security, SNMP
Traps, and Advanced. Check the box next to any setting you want to change from
within these six areas.
3 Select the General tab.
4 To change or set the Group Name, check the box next to that field. You can set a
Group Name to anything you want, up to 256 characters.
5 Change or set the Location Name by checking the box next to that field and
entering up to 256 characters.
6 Configure the DHCP setting to the desired state.
7 Change the Port and Link states of any of the Network Jack’s ports by checking
the box next to the characteristic you want to modify and selecting a value from
the drop list.
NOTE: To make configuration changes to a Network Jack from the Central
Configuration Manager, the NJ200 must already be discovered and part of the
device database, and you must be able to communicate with the device from
your workstation. If you can’t communicate with the device at this time, you
will receive an error message when you try to configure the unit.