3Com IntelliJack NJ200 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 58

3Com IntelliJack NJ200 Скачать руководство пользователя страница 19

2

I

NSTALLING

THE

C

ONFIGURATION

M

ANAGERS

Once you have installed the NJ200 hardware, you need to configure it for use on
your particular network. To configure the NJ200, install the Local and Central
Configuration managers.

System Requirements

The machine you install the software on should meet the following requirements:

•

Pentium processor

•

Minimum of 15MB disk space

•

Windows 2000 or Windows NT 4.0 with Service Pack 6 installed (Windows 95
and Windows 98 are not recommended operating systems for use with
management platforms. In most cases, the Configuration Manager software
will work with Windows 95, 98, or XP. However, please check 3Com’s web site
for additional information regarding XP support)

Installing the Local
and Central
Configuration
Managers

Run the following steps to install the Configuration Manager software:

1

Insert the Configuration Manager software CD into your Windows 2000 or
Windows NT computer.

2

If your computer is configured to Auto-Play CDs, the installation will start
automatically. If not, double-click the setup.exe icon on the CD, and you will see
this window:

NOTE: You will use the Local Configuration Manager for initial configuration of
the NJ200 on your network. It’s usually easiest if you load this software on a
laptop and use it to configure Network Jacks as you install them.

The NJ200 Central Configuration Manager is used for advanced configuration
and management of one or more NJ200s on your network. This software
should be installed on the machine you plan to use to manage your NJ200s
from a remote location—perhaps the same console you use for SNMP
management.

«
...
17
18
19
20
21
...
»

Содержание IntelliJack NJ200



























































Отзывы:

Нет отзывов