2
G
LOSSARY
Auto Select Media Type
A utility that detects the type of network cable connected to
the adapter and automatically selects that connection for
packet transmission. This function is implemented by all
NetWare ODI drivers, Windows for Workgroups drivers, NDIS
2.01 drivers, and Windows NT drivers.
Backbone
The main transmission medium used to interconnect the
workgroup areas of a network. It is usually coaxial or fiber.
Backplane
A motherboard assembly in a PC with connectors and
printed circuit traces into which printer circuit boards are
inserted.
Bus
A collection of signal lines. The definition of a bus specifies
the purpose of each line and the timing relationship of the
electrical signals.
Bus master adapter
An adapter that contains its own processor, which allows the
adapter to operate independently of the computer’s main
processor.
Coaxial cable
An electrical wire consisting of two primary electrical
elements: an outer braided wire that acts as a ground and an
inner one used to carry signals.
Configuration
The software settings that allow different hardware
components of a computer system to communicate with
one another.
Diagnostic test
A procedure used to detect and isolate a hardware or
software malfunction.
Содержание EtherLink 3C590
Страница 22: ...Using Auto Select Media Type 2 7 ...
Страница 23: ...2 8 CHAPTER 2 INSTALLING THE PCI ADAPTER ...
Страница 37: ...3 14 CHAPTER 3 INSTALLING THE NETWORK DRIVERS ...
Страница 49: ...4 12 CHAPTER 4 PERFORMING TROUBLESHOOTING AND DIAGNOSTIC TESTS ...