3Com EtherLink 3C590, Руководство пользователя

Страница: 19 / 76

2-4 C
HAPTER
2: I
NSTALLING THE
PCI A
DAPTER
Figure 2-2 Connecting Thin Ethernet Cable
2 Align the T connector’s slots with the pegs on the BNC
connector.
3 Push the T connector in and twist it clockwise until it stops.
The next step is to load the drivers, as explained in Chapter 3.
Connecting to Twisted-pair Cable
The 3C590-COMBO and 3C590-TPO adapters are both
equipped with an on-board transceiver for connection to
twisted-pair cable. The 3C590-TPO adapter is factory-set to
use the on-board transceiver as the default.
1 Make sure that the connector on your cable is wired
appropriately for standard 10BASE-T adapter cards.
Refer to Appendix B for RJ-45 connector pin assignments.
2 Align the RJ-45 plug on the end of the twisted-pair cable
with the notch on the adapter’s connector and insert it
into the adapter socket.
The next step is to load the drivers, as explained in Chapter 3.
BNC
connector
AUI
connector
RJ-45
connector
Thin Ethernet
cable