3Com EtherLink 3C590, Руководство пользователя

Страница: 28 / 76

Installing NetWare Drivers 3-5
Detailed Installation
For a more detailed description of the installation of a single
3C590 PCI adapter as a NetWare DOS ODI client, follow the
steps below.
You can use the AUTOLINK.CFG file to control the AutoLink
process. The AUTOLINK.CFG file in the root directory contains
default settings and descriptions of other control parameters.
1 Make sure that you have booted the computer under DOS,
version 6.x or later, and that your computer is connected
to the network (refer to Chapter 2).
2 Insert the 3C59X EtherDisk diskette in a floppy drive on
your computer and make that drive the active drive.
For example, if the diskette drive is A, type the following
command:
A: [Enter]
3 At the prompt, type:
INSTALL [Enter]
Alternatively, at the prompt, type:
AUTOLINK [Enter]
If a caution message appears, indicating a possible problem
with your PCI BIOS, follow the displayed instructions, which
provide a workaround patch. If the patch does not solve the
problem, contact your computer vendor for a new BIOS.
4 The first time you use the diskette to install an adapter, a
license screen appears. To accept the terms and conditions
of the 3Com end-user software license agreement, type
the following:
Y
To view the full text of the license agreement, press [F1].
(Once you have agreed to the terms and conditions of the
3Com license agreement, the license information screen will
not appear again.)