3Com EtherLink 3C590, Руководство пользователя

Страница: 46 / 76

Getting Help If a Test Fails 4-9
10 Install the adapter in another functioning computer and
run the tests again.
Your computer may be defective. If the adapter passes the
tests in the second computer, contact the reseller or
manufacturer of the original computer.
11 If you experience problems that occur only when using
the AutoLink program, display or print the AUTOLINK.LOG
file. The AUTOLINK.LOG file contains a log of all the events
that occurred during the AutoLink installation and
configuration process.
a To display the file, type:
type autolink.log | more
b To print the file, type:
print autolink.log
Changing the Test Setup
To change the test parameters, follow these steps:
1 Choose Test Setup from the Test menu in the main
window of the Configuration and Diagnostic Program or
use the <Test Setup> command button in the Run Tests
dialog box.
2 Press [Tab] to highlight any of the fields within the Test
Setup dialog box.
3 To change a setting in any field, follow these steps:
a In the Group Select box, use the arrow keys to select a
test group.
For more information on the Group 2 or Group 3 tests, refer to
the appropriate sections earlier in this chapter.
b In the Group X Tests box, use the arrow keys to highlight a
test. Press the [Space Bar] to enable or disable an
individual test.