3Com 4210G Series, Руководство по настройке, Страница: 871 / 1133

9-8
Hotkey Function
Ctrl+X
Deletes all the characters to the left of the cursor.
Ctrl+Y
Deletes all the characters to the right of the cursor.
Ctrl+Z
Exits to user view.
Ctrl+]
Terminates an incoming connection or a redirect connection.
Esc+B
Moves the cursor to the leading character of the continuous string to the
left.
Esc+D
Deletes all the characters of the continuous string at the current cursor
position and to the right of the cursor.
Esc+F
Moves the cursor to the front of the next continuous string to the right.
Esc+N
Moves the cursor down by one line (available before you press
Enter
)
Esc+P
Moves the cursor up by one line (available before you press
Enter
)
Esc+<
Specifies the cursor as the beginning of the clipboard.
Esc+>
Specifies the cursor as the ending of the clipboard.
These hotkeys are defined by the device. When you interact with the device from terminal software,
these keys may be defined to perform other operations. If so, the definition of the terminal software will
dominate.
Configuring Command Aliases
You can replace the first keyword of a command supported by the device with your preferred keyword
by configuring the command alias function. For example, if you configure
show
as the replacement of
the
display
keyword for each
display
command, you can input the command alias
show xx
to
execute the
display xx
command.
Note the following when you configure command aliases:
z
When you input a command alias, the system displays and saves the command in its original
format instead of its alias. That is, you can define and use a command alias but the command is
not saved and restored in its alias.
z
When you define a command alias, the
cmdkey
and
alias
arguments must be in complete form.
z
With the command alias function enabled, when you input an incomplete keyword, which partially
matches both a defined alias and the keyword of a command, the alias wins; to execute the
command whose keyword partially matches your input, you need to input the complete keyword.
When you input a character string that matches multiple aliases partially, the system prompts you
for various matched information.
z
If you press
Tab
after you input the keyword of an alias, the original format of the keyword will be
displayed.
z
You can replace only the first keyword of a non-undo command instead of the complete command;
and you can replace only the second keyword of
undo
commands.
Follow these steps to configure command aliases: