manualshive.com logo in svg

3Com 4210G Series, Руководство по настройке, Страница: 559 / 1133

Поделиться
Скачать
3Com 4210G Series Скачать руководство пользователя страница 559

 

2-16 

 

z

 

If the data flows from a user-side device carry VLAN tags, and 802.1X and guest VLAN are 
enabled on the access port, you are recommended to configure different VLAN IDs for the voice 
VLAN, the default port VLAN, and the guest VLAN of 802.1X. 

 

Displaying and Maintaining 802.1X 

To do… 

Use the command… 

Remarks 

Display 802.1X session 

information, statistics, or 

configuration information of 

specified or all ports

 

display dot1x

 [ 

sessions 

|

 

statistics 

] [

 interface 

interface-list

 ]

 

Available in any view 

Clear 802.1X statistics

 

reset dot1x statistics 

[ 

interface interface-list

 ]

 

Available in user view 

 

802.1X Configuration Example 

Network requirements 

z

 

The access control method of 

macbased

 is required on the port GigabitEthernet 1/0/1 to control 

clients. 

z

 

All clients belong to default domain aabbcc.net, which can accommodate up to 30 users. RADIUS 
authentication is performed at first, and then local authentication when no response from the 
RADIUS server is received. If the RADIUS accounting fails, the device gets users offline. 

z

 

A server group with two RADIUS servers is connected to the device. The IP addresses of the 
servers are 10.1.1.1 and 10.1.1.2 respectively. Use the former as the primary 
authentication/secondary accounting server, and the latter as the secondary 
authentication/primary accounting server.   

z

 

Set the shared key for the device to exchange packets with the authentication server as name, 
and that for the device to exchange packets with the accounting server as money. 

z

 

Specify the device to try up to five times at an interval of 5 seconds in transmitting a packet to the 
RADIUS server until it receives a response from the server, and to send real time accounting 
packets to the accounting server every 15 minutes. 

z

 

Specify the device to remove the domain name from the username before passing the username 
to the RADIUS server. 

z

 

Set the username of the 802.1X user as 

localuser

 and the password as 

localpass

 and specify to 

use clear text mode. Enable the idle cut function to get the user offline whenever the user remains 
idle for over 20 minutes. 

Содержание 4210G Series














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов