3Com 4210G Series, Руководство по настройке, Страница: 628 / 1133

8-19
Select
Connection
/
SSH
/
Auth
from the navigation tree. The following window appears. Click
Browse…
to bring up the file selection window, navigate to the private key file and click
OK
.
Figure 8-9
SSH client configuration interface 2)
In the window shown in
Figure 8-9 , click
Open
. If the connection is normal, you will be prompted to
enter the username. After entering the correct username (
client002
), you can enter the configuration
interface.
SSH Client Configuration Examples
When Switch Acts as Client for Password Authentication
Network requirements
z
As shown in Figure 8-10 , Switch A (the SSH client) needs to log into Switch B (the SSH server)
through the SSH protocol.
z
The username of the SSH client is
client001
and the password is
aabbcc
. Password
authentication is required.
Figure 8-10
Switch acts as client for password authentication
Configuration procedure
1) Configure the SSH server