3Com 4007, Справочник по командам

Страница: 300 / 574

300 C
HAPTER
12: I
NTERNET
P
ROTOCOL
(IP)
ip
Layer 2
Switching
Modules
✓
Multilayer
Switching
Modules
advancedTraceRoute
Tracks a route from a Multilayer Switching Module to a destination using
one or more of the advanced traceRoute options.
Valid Minimum Abbreviation
ip advancedT
Important Considerations
■
When you specify a host name, the host name and its associated IP
address
must be configured on a network name server. Also, you must
add the IP address on the name server to the list of name server
addresses that are associated with the network domain name. See “ip
dns domainName” earlier in this chapter for more information.
■
To interrupt the command, press Enter.
Options
Prompt Description
Possible
Values
[Default]
Host name or
IP address Host name or IP address of the
destination that you want to ping.
■
A valid host
name
■
IP address
0.0.0.0
Maximum ttl Maximum number of hops that the
module can use in outgoing probe
packets. 1 – 255 hops 30
Destination
port Destination (or base) UDP port
number that the module uses in
probe packets. Set the destination
UDP port number to be very high to
ensure that an application at the
destination is not using that port. 30000 –
65535 33434
Probe count Maximum number of probes that the
module sends at each TTL level. 1 – 10 3
Wait Maximum amount of time that the
module waits for a response to a
probe. 1 – 10 seconds 3
Packet size Number of bytes that the module
sends in each UDP probe packet. 28 – 4096
bytes 28
Source address Source address other than the one
from which the probe packets
originate. This option is available if
you have more than one IP interface
defined on the module
.
■
n (no)
■
y (yes)
y