3Com 4007, Справочник по командам

Страница: 135 / 574

bridge port detail
135
rxFrames Total number of frames that this bridge port received
from its segment. However, unlike the rxFrames field in
the Ethernet display which counts all frames, this field
does not count frames in error. Thus, this value may be
lower than the value shown in the rxFrames field in the
Ethernet display.
rxInternalFilters
(Multilayer Switching
Modules only) Number of frames discarded due to customer filters on
the rxInternal path.
rxMcastExcDiscs Number of multicast frames that were discarded when
rxMcastLimit was exceeded.
rxMcastExceeds Amount of time that rxMcastLimit has been exceeded.
rxMcastFilters
(Multilayer Switching
Modules) Number of frames that were discarded due to a
user-defined packet filter on the “receive multicast” path
of this port.
rxMcastLimit Configurable parameter that limits the rate of multicast
frames that are forwarded from a bridge port. The default
value is 0, which means there is no limit. To configure this
option, see “bridge port multicastLimit” in this chapter.
rxMcastLimitType
(Layer 2 Switching
Modules only) Configurable parameter that selects the type of frames on
which the multicast limit operates (both multicast and
broadcast frames, or broadcast frames only). The default
value is McastBcast. To configure this option, see “bridge
port multicastLimit” in this chapter.
rxNoDestDiscs
(Layer 2 Switching
Modules only) Number of frames that this port discarded because of an
unknown VLAN ID or because the port was in a
non-forwarding Spanning Tree state.
rxNoRescrDiscs
(Multilayer Switching
Modules only) Number of frames that this port discarded due to
insufficient resource availability (buffer space).
rxOtherDiscs Number of frames that this port discarded because they
contained either invalid (group) source addresses or
source addresses that belong to this bridge (indicates
network loops).
rxSameSegDiscs Number of frames that this port discarded because the
destination address is known on the same network
segment as the source address and, thus, the frame does
not need to be bridged.
rxSecurityDiscs Number of frames that this port discarded because they
contained source addresses that were statically configured
on another bridge port.
SRRingNumber
(Multilayer Switching
Modules only) (Not available at this release)
Field Description