background image

Configuring the Managed PC Boot Agent (MBA)

77

Using the 3Com DOS Configuration Program

This section describes NIC configuration for computers running DOS or NetWare. 

To run the DOS diagnostic program:

1

Copy 3c99xcfg.exe from the 

EtherCD

 to the root directory of a DOS-bootable diskette.

2

Boot to DOS using the DOS-bootable diskette.

3

Enter the following at the DOS prompt:

a:\3c99xcfg.exe

where a:\ is the drive containing the DOS-bootable diskette.

If multiple NICs are installed in the PC, select Select NIC on the first screen to display a 
list of installed NICs. Use the arrow keys to select the NIC that you want to configure 
and press Enter.

4

Use the arrow keys to scroll the list and make a selection. Press Enter.

5

Continue this procedure for other options. For more information on a specific option, 
select the option and press F1.

Configuring the Managed PC Boot Agent (MBA)

This section explains how to configure the Managed PC Boot Agent (MBA) boot ROM to 
boot from the network.

Enabling or Disabling the Boot ROM Setting

The default NIC boot ROM setting is 

Disabled

. This setting must be enabled to boot from 

the network.

To enable or disable the NIC boot ROM setting:

1

Make sure that the NIC is installed and is connected to the network and that the NIC 
driver is installed.

2

Open the Windows 

Start

 menu.

3

Select 

Programs

, and then 

3Com NIC Utilities.

NOTE: 

If you do not have a DOS-bootable diskette, see “Making a DOS-Bootable 

Diskette” on page 15 for instructions.

NOTE: 

On the Configuration screen, when you choose the Auto Select setting for 

Media Type, the setting for Duplex is automatically changed to Auto Select. 
Selecting Auto Select for Duplex automatically changes the Media Type setting to 
Auto Select.

NOTE: 

Note that any configuration change you make through the Windows 2000 

Advanced tab overrides the same configuration setting made through the 3Com 
NIC (Windows) Diagnostic program or the 3Com DOS Diagnostic program.

NOTE: 

Press Esc to return to a previous screen. If a secondary window is open, 

press Esc to close the window.

NOTE: 

For detailed information on using, configuring, and troubleshooting the 

MBA boot ROM, refer to the

 Managed PC Boot Agent User Guide, 

located with 

the MBA software on the 

EtherCD.

Содержание 3C990B-TX-M

































































































































Отзывы: