3Com 3C421600A, Справочное руководство

Страница: 114 / 269

114 C
HAPTER
4: R
OUTER
C
OMMAND
R
EFERENCE
■
Oper(ating) Status — Current operating state of the interface: Up or
Down . Oper Status is Up only if modem is connected.
■
Admin(istrative) Status — State of the interface configured by the
administrator: Up or Down .
list syslogs Displays IP addresses that get SYSLOG entries from the Syslog Table. See
add syslog
for more information and
delete syslog
command to
remove entries. This command shows the following:
■
Syslog — IP address to which syslog entries are sent.
■
Log Level — Reporting level of entries to send: (e.g.) UNUSUAL.
■
M(e)s(sa)g(e) — current number of messages sent since system
bootup.
■
Count — Number of event messages sent to this SYSLOG sink.
■
Facility — SYSLOG sink node facility to which the SYSLOG message is
sent. The choices are LOG_AUTH , LOG_LOCAL0 , LOG_LOCAL1 ,
LOG_LOCAL2 , LOG_LOCAL3 , LOG_LOCAL4 , LOG_LOCAL5 ,
LOG_LOCAL6 , and LOG_LOCAL7.
Compare with
list facilities
and
set facilities
commands,
which control what gets output to the Console port. See the following
table.
list tcp connections Displays information about all TCP (Telnet, RLOGIN, etc.) connections
including those set by the user. It lists the following:
■
Local address — IP address of the local host for this connection.
■
Local Port — TCP port number used by the local connection.
■
Remote Address — IP address of the remote host for this connection.
■
Remote Port — TCP port number used by the remote connection.
■
Status — State of the connection: Closed , Listen , SynSent ,
SynReceived , Established , FinWait1 , FinWait2 , CloseWait , LastAck ,
Closing , TimeWait , or DeleteTCB .
SYSLOG SINKS
SysLog Log Level Msg Count Facility
157.132.148.10
9 UNUSUAL 214 50 LOG_AUTH