Set User Commands
169
Sets parameters for users whose
type
is network and who connect over
an interface running fcp.
set network user
<username> ppp
channel_decrement [percent]
channel_expansion [percent]
compression_algorithm [ascend | auto | microsoft | none |
stac]
expansion_algorithm [constant | linear]
max_channels <0-38>
min_size_compression <0-2048>
nbt_keepalive_timeout <0-65536>
receive_acc_map <hex_number>
reconnect_type [master | peer | slave]
reserve [enable | disable]
reset_mode_compression [auto | every_packet | every_error]
spoofed_protocols
suspend_timer [0-65536]
transmit_acc_map <hex_number>
Sets parameters for users whose
type
is network and who connect over
an interface running MLPPP. Adding a network PPP user to the User Table
automatically
enables MLPPP, which serves to group multiple links into a
bundle to combine the communications capacity of both links. This
applies to ISDN service, where there are two bearer channels, and your
provider allows combining both channels on demand.
Since default values for channel decrement and expansion are
0
, to
employ ondemand allocation, change the settings to suit your anticipated
bandwidth traffic. We recommend settings of
20 (decrement)
and
60
(expansion).
To ensure MLPPP is up on both ends of the connection, do not change
the max_channels default value of
2
, otherwise MLPPP may fail.
Parameter
Description
<username>
Name user, previously defined using add user with network as the
type. Limit:
32 ASCII characters
.
channel_expan
sion
When the line usage of the first channel exceeds this percentage,
FCP adds the second channel. Specifying 100% disables the
second and additional channels.
compression_
algorithm
Determines whether compression is negotiated on this FCP link.
max_channels
Sets how many channels to use for FCP.
