Configurable Table Overview
27
SNMP Configuration
Tables
The RAS 1500 provides support for SNMP version 1 and industry standard
MIB-II variables. These variables are fully described in your MIB-II
documentation.
The
SNMP Community Table
stores information about which SNMP
servers (if any) are permitted to make SET and GET requests, as well as
Read and Write Communities.
The
SNMP Trap Community Table
saves names and addresses of trap
communities.
The
SNMP Community
table saves names and addresses of communities
as associated pools.
SYSLOG Table
This table contains IP addresses of SYSLOG hosts to which event
messages are sent. You can define multiple SYSLOG hosts that record
event messages by the message's log level. Use the
list syslogs
command to display this table.
Event Critical
Messages Table
This table contains event messages logged
critical
. Using the
list critical events
command displays these messages to Telnet and
dial-in sessions as well as the default Console session.
Filter and Associated
Tables
Filter file names of filters you create are stored in the
Filter Table
but the
filters themselves are stored as ASCII text in FLASH memory. The
Access
Filter Table
determines whether user filters take precedence over interface
filters. Use the
list filters
command to display this table.
File Table
This table contains system files and other files you may have loaded in the
RAS 1500 including filter files. Use the
list files
command to display
this table.
Network Services and
Available Servers
Tables
The
Network Services
and
Available Servers
tables hold information
related to the RAS 1500-supported network services such as Telnet,
SNMP, ClearTCP, Dial-Out, and Trivial File Transfer Protocol (TFTP). These
default services can be edited or new services created with the
add
and
set network services
commands. Use the
list network services
and
list available servers
commands to display these tables.
