28
Adjusting the volume control of one device DOES NOT affect the volume control of the
other devices. For example, lowering the volume of the speaker has no effect on the
handset volume. Changes you make to any device remain in effect if you reset the
telephone to its default settings.
Ringer Volume
— To raise or lower the volume of the ring, press the up or down
Volume Control
button repeatedly while your telephone is ringing, until the volume
is at the level that you prefer.
Handset Volume
— To raise or lower the volume of the dial tone and the voice level
of your callers, pick up the handset then press the up or down
Volume Control
buttons repeatedly until the volume is at the level you prefer. You can change the
volume during a conversation or by listening to the dial tone.
Headset Volume
— During a call with the headset used, press the up or down
Volume Control
buttons repeatedly until the volume is at the level you prefer.
Speaker Volume
— To raise or lower the volume of the speaker, press the
Speaker
button and then press the up or down
Volume Control
button repeatedly until the
volume is at the level you prefer. You can change the volume during a conversation
or by pressing
Speaker
and listening to the dial tone.
When you press a
Volume Control
button, the Display Panel shows the volume setting
as a series of dark vertical bars. Repeatedly pressing a
Volume Control
button raises
the volume (increases the number of displayed bars) or lowers the volume (decreases
the number of displayed bars).
Using the Hands Free Feature
You can use your telephone as an intercom. You can answer internal (intercom) calls
without picking up the handset. When you receive an internal call, your telephone
sounds a tone and activates the speaker phone.
You cannot use this feature with external calls (a call from outside your local call
processor) or anonymous (blocked caller ID) calls. These calls ring to your telephone as
usual.
If your telephone is part of a bridged extension, see Hands Free and Bridged Line
Calls for additional information.
You can also enable and disable Hands Free by using Feature Code 100. See Using
the Hands Free Feature.
Putting a Call on Hold
To put a call on hold:
