360 Vision Invictus Hybrid, Руководство по установке и настройке

Страница: 42 / 49

13 Network Settings Recovery
When network settings are changed, the IP address, Net Mask and Gateway are validated before they are saved.
However if the settings are such that the lnvicts Hybrid has settings which mean that it cannot be seen on the user's
network, it may become necessary to use the 'Network Settings Recovery' feature as described below.
The 'Network Settings Recovery' IP address may conflict with an IP address that is already defined on the network,
it may be necessary to disconnect the lnvictus Hybrid from the network and control it locally using a network
connection to a laptop so that the IP address can be set to a suitable setting before the lnvictus Hybrid is
reconnected to the main network.
Procedure for 'Network Settings Recovery'
If necessary disconnect the lnvictus Hybrid from the main network.
Turn power to the lnvictus Hybrid OFF for 3 seconds.
Turn power to the lnvictus Hybrid ON for 4 seconds.
Repeat the above five times.
On the final power ON, leave the power switched on for at least 5 minutes to allow the lnvictus Hybrid to initialise.
(See section Locating the lnvictus Hybrid on your Network - page 24)
V12_1_129_03 Page 42 of 49
© 360 Vision Technology Ltd