360 Vision Invictus Hybrid Скачать руководство пользователя страница 3

Страница: 3 / 49

1 Safety and Precautions

1. Please read these notes before attempting to operate the 360 Vision lnvictus Hybrid, and keep for future reference.

2. DO NOT disassemble or remove covers. This will break the water seals and invalidate the warranty.

3. All servicing and repairs must be handled by 360 Vision Technology.

4. Avoid point the camera direct towards a bright light source (sunlight), or expose the camera to intensive light

situation as this may damage the camera pick-up device.

5. Installation should be carried out by suitably qualified personnel, in accordance with the local codes of practice and

regulations.

6. 360 Vision Technology Limited accept no liability for any damage caused by incorrect or improper installation.

7. To prevent risk of injury caused by the lnvictus hybrid or mounting options becoming detached, fit a suitable safety

chain or lanyard.

8. Use only 360 Vision lnvictus Hybrid power supplies. These have suitable terminals for all the wires in the lnvictus

composite cable.

9. Please handle the lnvictus Hybrid with care, as improper handling may cause damage within this unit. ***** Photo

Biological Safety Information

(See page 46)

M8 bolts (HMA) need to be tightened to 11 Nm

2 Housing Dimensional Drawing

lnvictus HMA with LED Array

V12_1_129_03

Page 3 of 49

Содержание Invictus Hybrid


















































Результаты поиска

Содержание Invictus Hybrid

Отзывы:

Похожие инструкции для Invictus Hybrid

Бренды по названию

Популярные бренды

360 Vision Invictus Hybrid, Руководство по установке и настройке

Результаты поиска

Содержание Invictus Hybrid

Отзывы:

Похожие инструкции для Invictus Hybrid

Бренды по названию

Популярные бренды