Invictus Installation Manual V2.1.25.3
Page 31
© 360 Vision Technology Ltd.
PTZ position co-ordinates are also shown, use the refresh button to refresh the data if the camera has been
moved.
PTZ position co-ordinates can also be added manually, use the go button to send the camera to the coordinates
set.
Pan/Tilt Offset
Used to set current pan/tilt to zero.
• Set - Set current position to zero.
• Clear - Clear current zero position.
OK
to program the new settings into the Invictus Hybrid.
Cancel
to abandon the changes to the advanced feature settings.
12.2.4 Camera
• Camera - Cannot be edited, shows label/name given to the camera.
(See section Video - Camera - page 26).
The Camera page, offers options to:-
•
Digital Zoom - Enable digital zoom. Default is off.
• White Balance - Select White Balance settings to suit camera location.
(See page 43 for table of options).
•
Wide Dynamic range - Enable WDR. Options available are ON, Auto and Off. Default is Auto.
• Zoom speed - Select zoom speed of the lens. Options are slow, medium, high and highest.
• Proportional Zoom - Automatically reduces/increases pan/tilt speed depending on zoom ratio. Default
is on.
• Freeze Preset - This option freezes the image, when moving between presets. This can help reduce
the bandwidth. Default is off.
• Day Aperture - Can be used to increase the picture detail. Default is 10.
• Sensor Frame Rate - Can be used to set the camera to suit 25fps (PAL) or 30fps (NTSC). Unit must
be rebooted for settings to apply. Default is PAL.
•
Auto Focus/Iris on PTZ - Auto focus/iris will activate when PTZ is used, can be switched off. Default is
on.
• Fast Shutter - Select fast shutter if using the Invictus Hybrid camera on a ANPR system. Default is
off.
(See page 43 for table of options).
